=>> Building devel/p5-Coro build started at Thu May 1 17:19:23 BST 2025 port directory: /usr/ports/devel/p5-Coro package name: p5-Coro-6.570,1 building for: FreeBSD pkg-builder.dan.net.uk 14.2-RELEASE FreeBSD 14.2-RELEASE amd64 maintained by: sunpoet@FreeBSD.org Makefile datestamp: -rw-r--r-- 1 root wheel 1260 Dec 29 14:16 /usr/ports/devel/p5-Coro/Makefile Ports top last git commit: 5529c5919b Ports top unclean checkout: yes Port dir last git commit: 1a35b19e6d Port dir unclean checkout: no Poudriere version: poudriere-git-3.4.2 Host OSVERSION: 1402000 Jail OSVERSION: 1402000 Job Id: 04 ---Begin Environment--- SHELL=/bin/sh OSVERSION=1402000 UNAME_v=FreeBSD 14.2-RELEASE UNAME_r=14.2-RELEASE BLOCKSIZE=K MAIL=/var/mail/root MM_CHARSET=UTF-8 LANG=C.UTF-8 STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin MAKE_OBJDIR_CHECK_WRITABLE=0 LOCALBASE=/usr/local USER=root POUDRIERE_NAME=poudriere-git LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.4.2 MASTERMNT=/usr/local/poudriere/data/.m/14-amd64-default-dan/ref LC_COLLATE=C POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM=screen OUTPUT_REDIRECTED_STDERR=4 OUTPUT_REDIRECTED=1 PWD=/usr/local/poudriere/data/.m/14-amd64-default-dan/04/.p OUTPUT_REDIRECTED_STDOUT=3 P_PORTS_FEATURES=FLAVORS SUBPACKAGES SELECTED_OPTIONS MASTERNAME=14-amd64-default-dan SCRIPTPREFIX=/usr/local/share/poudriere SCRIPTNAME=bulk.sh OLDPWD=/usr/local/poudriere/data/.m/14-amd64-default-dan/ref/.p/pool POUDRIERE_PKGNAME=poudriere-git-3.4.2 SCRIPTPATH=/usr/local/share/poudriere/bulk.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV= FLAVOR= MAKE_ARGS= ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ===> The following configuration options are available for p5-Coro-6.570,1: DOCS=on: Build and/or install documentation EXAMPLES=on: Build and/or install examples ===> Use 'make config' to modify these settings ---End OPTIONS List--- --MAINTAINER-- sunpoet@FreeBSD.org --End MAINTAINER-- --CONFIGURE_ARGS-- INSTALLDIRS="site" CC="cc" CCFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " LD="cc" PREFIX="/usr/local" INSTALLPRIVLIB="/usr/local/lib" INSTALLARCHLIB="/usr/local/lib" --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- ac_cv_path_PERL=/usr/local/bin/perl ac_cv_path_PERL_PATH=/usr/local/bin/perl PERL_USE_UNSAFE_INC=1 XDG_DATA_HOME=/wrkdirs/usr/ports/devel/p5-Coro/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/devel/p5-Coro/work XDG_CACHE_HOME=/wrkdirs/usr/ports/devel/p5-Coro/work/.cache HOME=/wrkdirs/usr/ports/devel/p5-Coro/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/devel/p5-Coro/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/devel/p5-Coro/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig SHELL=/bin/sh CONFIG_SHELL=/bin/sh PERL_EXTUTILS_AUTOINSTALL="--skipdeps" PERL_MM_USE_DEFAULT="YES" --End CONFIGURE_ENV-- --MAKE_ENV-- PERL_USE_UNSAFE_INC=1 XDG_DATA_HOME=/wrkdirs/usr/ports/devel/p5-Coro/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/devel/p5-Coro/work XDG_CACHE_HOME=/wrkdirs/usr/ports/devel/p5-Coro/work/.cache HOME=/wrkdirs/usr/ports/devel/p5-Coro/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/devel/p5-Coro/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/devel/p5-Coro/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local LOCALBASE=/usr/local CC="cc" CFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" -fstack-protector-strong " LIBS="" CXX="c++" CXXFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- PORTDOCS="" PORTEXAMPLES="" OSREL=14.2 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib PERL_VERSION=5.36.3 PERL_VER=5.36 PERL5_MAN1=lib/perl5/site_perl/man/man1 PERL5_MAN3=lib/perl5/site_perl/man/man3 SITE_PERL=lib/perl5/site_perl SITE_ARCH=lib/perl5/site_perl/mach/5.36 DOCSDIR="share/doc/Coro" EXAMPLESDIR="share/examples/Coro" DATADIR="share/Coro" WWWDIR="www/Coro" ETCDIR="etc/Coro" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/Coro DOCSDIR=/usr/local/share/doc/Coro EXAMPLESDIR=/usr/local/share/examples/Coro WWWDIR=/usr/local/www/Coro ETCDIR=/usr/local/etc/Coro --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles FORCE_PACKAGE=yes PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes #### #### CCACHE_CPP2=1 WITH_SSP_PORTS=yes WITH_SSP=yes #WITH_LTO=yes DISABLE_LICENSES=yes LICENSES_ACCEPTED=AGPLv3 APACHE10 APACHE11 APACHE20 ART10 ARTPERL10 ART20 BSD BSD2CLAUSE BSD3CLAUSE BSD4CLAUSE BSL CC0-1.0 CDDL ClArtistic EPL GFDL GMGPL GPLv1 GPLv2 GPLv3 GPLv3RLE ISCL LGPL20 LGPL21 LGPL3 LPPL10 LPPL11 LPPL12 LPPL13 LPPL13a LPPL13b LPPL13c MIT MPL OpenSSL OFL10 OFL11 OWL PostgreSQL PHP202 PHP30 PHP301 PSFL RUBY ZLIB ZPL21 SVM-Light EULA ALASIR Microsoft-exFAT SIMIAN UDEVGAME unknown MTA COMMERCIAL teamspeak NO_LICENSES_DIALOGS=yes #### #### NO_IGNORE=yes DEFAULT_VERSIONS+=ssl=openssl apache=2.4 imagemagick=7 java=21 linux=c7 mysql=8.0 php=8.3 samba=4.19 varnish=7 WITH_SETID_MODE=force PHP_ZTS=enabled OPTIONS_UNSET+=OPENJPEG OPTIONS_UNSET+=GSSAPI_BASE OPTIONS_SET+=ZTS OPTIONS_SET+=GSSAPI_NONE ALLOW_UNSUPPORTED_SYSTEM=yes WITH_CCACHE_BUILD=yes CCACHE_DIR=/root/.ccache #### Misc Poudriere #### .include "/etc/make.conf.ports_env" GID=0 UID=0 DISABLE_MAKE_JOBS=poudriere ---End make.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 33554432 stack size (kbytes, -s) 524288 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 89999 open files (-n) 8192 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited pipebuf (-y) unlimited --End resource limits-- =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> p5-Coro-6.570,1 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-2.1.2.pkg [pkg-builder.dan.net.uk] Installing pkg-2.1.2... [pkg-builder.dan.net.uk] Extracting pkg-2.1.2: .......... done ===> p5-Coro-6.570,1 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of p5-Coro-6.570,1 =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Fetching all distfiles required by p5-Coro-6.570,1 for building =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Fetching all distfiles required by p5-Coro-6.570,1 for building => SHA256 Checksum OK for Coro-6.57.tar.gz. =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Fetching all distfiles required by p5-Coro-6.570,1 for building ===> Extracting for p5-Coro-6.570,1 => SHA256 Checksum OK for Coro-6.57.tar.gz. =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Patching for p5-Coro-6.570,1 ===> Applying FreeBSD patches for p5-Coro-6.570,1 from /usr/ports/devel/p5-Coro/files =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> p5-Coro-6.570,1 depends on package: p5-AnyEvent>=7,1 - not found ===> Installing existing package /packages/All/p5-AnyEvent-7.17,1.pkg [pkg-builder.dan.net.uk] Installing p5-AnyEvent-7.17,1... [pkg-builder.dan.net.uk] `-- Installing perl5-5.36.3_3... [pkg-builder.dan.net.uk] `-- Extracting perl5-5.36.3_3: .......... done [pkg-builder.dan.net.uk] Extracting p5-AnyEvent-7.17,1: .......... done ===> p5-Coro-6.570,1 depends on package: p5-AnyEvent>=7,1 - found ===> Returning to build of p5-Coro-6.570,1 ===> p5-Coro-6.570,1 depends on package: p5-AnyEvent-AIO>=1.0 - not found ===> Installing existing package /packages/All/p5-AnyEvent-AIO-1.1_1.pkg [pkg-builder.dan.net.uk] Installing p5-AnyEvent-AIO-1.1_1... [pkg-builder.dan.net.uk] Extracting p5-AnyEvent-AIO-1.1_1: ... done ===> p5-Coro-6.570,1 depends on package: p5-AnyEvent-AIO>=1.0 - found ===> Returning to build of p5-Coro-6.570,1 ===> p5-Coro-6.570,1 depends on package: p5-EV>=4 - not found ===> Installing existing package /packages/All/p5-EV-4.34,1.pkg [pkg-builder.dan.net.uk] Installing p5-EV-4.34,1... [pkg-builder.dan.net.uk] `-- Installing p5-common-sense-3.75... [pkg-builder.dan.net.uk] `-- Extracting p5-common-sense-3.75: .... done [pkg-builder.dan.net.uk] Extracting p5-EV-4.34,1: .......... done ===> p5-Coro-6.570,1 depends on package: p5-EV>=4 - found ===> Returning to build of p5-Coro-6.570,1 ===> p5-Coro-6.570,1 depends on package: p5-Event>=1.08 - not found ===> Installing existing package /packages/All/p5-Event-1.28.pkg [pkg-builder.dan.net.uk] Installing p5-Event-1.28... [pkg-builder.dan.net.uk] Extracting p5-Event-1.28: .......... done ===> p5-Coro-6.570,1 depends on package: p5-Event>=1.08 - found ===> Returning to build of p5-Coro-6.570,1 ===> p5-Coro-6.570,1 depends on package: p5-Guard>=0.5 - not found ===> Installing existing package /packages/All/p5-Guard-1.023_2.pkg [pkg-builder.dan.net.uk] Installing p5-Guard-1.023_2... [pkg-builder.dan.net.uk] Extracting p5-Guard-1.023_2: .... done ===> p5-Coro-6.570,1 depends on package: p5-Guard>=0.5 - found ===> Returning to build of p5-Coro-6.570,1 ===> p5-Coro-6.570,1 depends on package: p5-IO-AIO>=3.1 - not found ===> Installing existing package /packages/All/p5-IO-AIO-4.81.pkg [pkg-builder.dan.net.uk] Installing p5-IO-AIO-4.81... [pkg-builder.dan.net.uk] Extracting p5-IO-AIO-4.81: ...... done ===> p5-Coro-6.570,1 depends on package: p5-IO-AIO>=3.1 - found ===> Returning to build of p5-Coro-6.570,1 ===> p5-Coro-6.570,1 depends on package: p5-common-sense>=0 - found ===> p5-Coro-6.570,1 depends on package: perl5>=5.36<5.37 - found ===> p5-Coro-6.570,1 depends on package: perl5>=5.36<5.37 - found ===> p5-Coro-6.570,1 depends on file: /usr/local/bin/ccache - not found ===> Installing existing package /packages/All/ccache-3.7.12_8.pkg [pkg-builder.dan.net.uk] Installing ccache-3.7.12_8... [pkg-builder.dan.net.uk] Extracting ccache-3.7.12_8: ......... done Create compiler links... create symlink for cc create symlink for cc (world) create symlink for c++ create symlink for c++ (world) create symlink for CC create symlink for CC (world) create symlink for clang create symlink for clang (world) create symlink for clang++ create symlink for clang++ (world) ===== Message from ccache-3.7.12_8: -- NOTE: Please read /usr/local/share/doc/ccache/ccache-howto-freebsd.txt for information on using ccache with FreeBSD ports and src. ===> p5-Coro-6.570,1 depends on file: /usr/local/bin/ccache - found ===> Returning to build of p5-Coro-6.570,1 =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Configuring for p5-Coro-6.570,1 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Event version 1.28 found, building Event support. EV version 4.34 found, building EV support. Checking if your kit is complete... Looks good *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has a number of configuration options. Due to its maturity, the defaults that Coro chooses are usually fine, so you can decide to skip these questions. Only if something went wrong you should select 'n' here and manually configure Coro, and, of course, report this to the maintainer :) Skip further questions and use defaults (y/n)? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a number of methods to implement coroutines at the C level. The default chosen is based on your current confguration and is correct in most cases, but you still can chose between these alternatives: u The unix 'ucontext.h' functions are relatively new and not implemented or well-tested in older unices. They allow very fast coroutine creation and reasonably fast switching. They are, however, usually slower than the other alternatives due to an extra syscall done by swapcontext. And while nominally most portable (it's the only POSIX-standardised interface for coroutines), ucontext functions are, as usual, broken on most/all BSDs. s If the ucontext functions are not working or you don't want to use them for other reasons you can try a workaround using setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine creation is rather slow, but switching is very fast (often much faster than with the ucontext functions). Unfortunately, glibc-2.1 and below don't even feature a working sigaltstack. You cannot use this implementation if some other code uses SIGUSR2 or you plan to create coroutines from an alternative signal stack, as both are being used for coroutine creation. a Handcoded assembly. This is the fastest and most compatible method, with the least side effects, if it works, that is. It has been tested on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64 systems using the SVR ELF ABI (it is also reported to be working on Strawberry Perl for Windows using MinGW). This is the recommended method on supported platforms. When it doesn't work, use another method, such as (s)etjmp/longjmp. l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need this hack. Since it is very linux-specific it is also quite fast and recommended even for newer versions; when it works, that is (currently x86 and a few others only. If it compiles, it's usually ok). Newer glibc versions (>= 2.5) stop working with this implementation however. i IRIX. For some reason, SGI really does not like to follow POSIX (does that surprise you?), so this workaround might be needed (it's fast), although [s] and [u] should also work now. w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry Perl), although, as there is no standard on how to do this under windows, different environments might work differently. Doh. f Microsoft Windows. Try this on Microsoft Windows if w fails. It is slower and uses a lot more memory, but should be working all the time. p Use pthread API. Try to avoid this option, it was only created to make a point about the programming language shootout. It is unlikely to work with perls that have windows process emulation enabled ("perl threads"). It is also likely the slowest method of implementing coroutines. It might work fine as a last resort, however, as the pthread API is slightly better tested than ucontext functions for example. Of course, not on BSDs, who usually have very broken pthread implementations. Coro tries hard to come up with a suitable default for most systems, so pressing return at the prompt usually does the right thing. If you experience problems (e.g. make test fails) then you should experiment with this setting. Use which implementation, etjmp, ctx, sm, rix, inux,

threads, indows, iber? [a] a Using handcoded assembler implementation *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Per-context stack size factor: Depending on your settings, Coro tries to share the C stacks is creates as much as possible, but sometimes it needs to allocate a new one. This setting controls the maximum size that gets allocated, and should not be set too high, as memory and address space still is wasted even if it's not fully used. The value entered will be multiplied by sizeof(void *), which is usually 4 on 32-bit systems, and 8 on 64-bit systems. A setting of 16384 (the default) therefore corresponds to a 64k..128k stack, which usually is ample space (you might even want to try 8192 or lower if your program creates many coroutines). On systems supporting mmap and dynamic memory management, the actual memory usually gets allocated on demand, but with many large stacks you can still run out of address space on your typical 32 bit platform (not to forget the pagetables). Some perls (mostly threaded ones and perl compiled under linux 2.6) and some programs (inefficient regexes can use a lot of stack space) may need much, much more: If Coro segfaults with weird backtraces (e.g. in a function prologue) or in t/10_bugs.t, you might want to increase this to 65536 or more. The default should be fine, and can be changed at runtime with Coro::State::cctx_stacksize. C stack size factor? [16384] 16384 using a stacksize of 16384 * sizeof(void*) *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can optionally put a guard area before each stack segment: When the stack is too small and the access is not too far outside the stack (i.e. within the guard area), then the program will safely segfault instead of running into other data. The cost is some additional overhead with is usually negligible, and extra use of address space. The guard area size currently needs to be specified in pages (typical pagesizes are 4k and 8k). The guard area is only enabled on a few hardcoded architectures and is ignored on others. The actual preprocessor expression disables this feature if: !__i386 && !__x86_64 && !__powerpc && !__m68k && !__alpha && !__mips && !__sparc64 The default, as usual, should be just fine. Number of guard pages (0 disables)? [4] 4 *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can tell valgrind about its stacks and so reduce spurious warnings where valgrind would otherwise complain about possible stack switches. Enabling this does not incur noticable runtime or memory overhead, but it requires that you have the header file available. Valgrind support is completely optional, so disabling it is the safe choice. Enable valgrind support (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use (or even trick) some perl functions into doing what it needs instead of relying on (some) of its own functions. This might increase chances that it compiles and works, but it could just as well result in memory leaks, crashes or silent data corruption. It certainly does result in slightly slower speed and higher memory consumption, though, so YOU SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT. Prefer perl functions over coro functions (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro can use a simple JIT compiler to compile a part of the thread switch function at runtime. On perls with windows process emulation (most!), this results in a 50% speed improvement. On sane perls, the gain is much less, usually around 5%. If you enable this option, then the JIT will be enabled, on compatible operating systems and CPUs (currently only x86/amd64 on certain unix clones). Otherwise, it will be disabled. It should be safe to leave on - this setting is only here so you can switch it off in case of problems. Note that some broken kernels (often calling themselves "hardened") break all JIT generation by manipulating some system calls. If you get bus errors or segmentation faults immediately when the JIT is enabled but not without, then note that disabling the JIT only fixes some symptoms, not the underlying problem, and you might run into other problems later. Try to use the JIT compiler, if available? [y] y *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Coro has experimental support for cloning states. This can be used to implement a scheme-like call/cc. However, this doesn't add to the expressiveness in general, and is likely perl-version specific (and perl 5.12 deliberately removed support for it). As such, it is disabled by default. Enable it when you want to play around with it, but note that it isn't supported, and unlikely ever will be. It exists mainly to prove that it could be done - if only it were useful for something. Implement Coro::State->clone method (y/n)? [n] n *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for Coro Writing MYMETA.yml and MYMETA.json =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Building for p5-Coro-6.570,1 cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl cp Coro/Timer.pm blib/lib/Coro/Timer.pm cp Coro/State.pm blib/lib/Coro/State.pm cp Coro/Select.pm blib/lib/Coro/Select.pm cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm cp Coro/Specific.pm blib/lib/Coro/Specific.pm cp Coro/Util.pm blib/lib/Coro/Util.pm cp Coro/Socket.pm blib/lib/Coro/Socket.pm cp Coro.pm blib/lib/Coro.pm cp Coro/LWP.pm blib/lib/Coro/LWP.pm cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm cp Coro/Storable.pm blib/lib/Coro/Storable.pm cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl cp Coro/Debug.pm blib/lib/Coro/Debug.pm cp Coro/Channel.pm blib/lib/Coro/Channel.pm cp Coro/Signal.pm blib/lib/Coro/Signal.pm cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h cp Coro/AIO.pm blib/lib/Coro/AIO.pm cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm cp Coro/BDB.pm blib/lib/Coro/BDB.pm cp Coro/Handle.pm blib/lib/Coro/Handle.pm Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged) Skip ../blib/lib/Coro/Specific.pm (unchanged) Skip ../blib/lib/Coro/AnyEvent.pm (unchanged) Skip ../blib/lib/Coro/LWP.pm (unchanged) Skip ../blib/lib/Coro/RWLock.pm (unchanged) Skip ../blib/lib/Coro/BDB.pm (unchanged) Skip ../blib/lib/Coro/Channel.pm (unchanged) Skip ../blib/lib/Coro/Signal.pm (unchanged) Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged) Skip ../blib/lib/Coro/Timer.pm (unchanged) Skip ../blib/lib/Coro/AIO.pm (unchanged) Skip ../blib/lib/Coro/Socket.pm (unchanged) Skip ../blib/lib/Coro/Util.pm (unchanged) Skip ../blib/lib/Coro/State.pm (unchanged) Skip ../blib/lib/Coro/MakeMaker.pm (unchanged) Skip ../blib/lib/Coro/Handle.pm (unchanged) Skip ../blib/lib/Coro/Storable.pm (unchanged) Skip ../blib/lib/Coro/Debug.pm (unchanged) Skip ../blib/lib/Coro/Select.pm (unchanged) cp Intro.pod ../blib/lib/Coro/Intro.pod Skip ../blib/lib/Coro/Semaphore.pm (unchanged) Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged) Running Mkbootstrap for State () chmod 644 "State.bs" "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 "/usr/local/bin/perl" "/usr/local/lib/perl5/5.36/ExtUtils/xsubpp" -typemap '/usr/local/lib/perl5/5.36/ExtUtils/typemap' -typemap '/wrkdirs/usr/ports/devel/p5-Coro/work/Coro-6.57/Coro/typemap' State.xs > State.xsc Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3897 mv State.xsc State.c cc -c -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.36/mach/CORE" -DCORO_ASM -DCORO_STACKSIZE=16384 -DCORO_GUARDPAGES=4 -DCORO_JIT=1 State.c State.xs:1534:1: warning: '/*' within block comment [-Wcomment] 1534 | /* that are not, uhm, essential */ | ^ State.xs:2592:7: warning: add explicit braces to avoid dangling else [-Wdangling-else] 2592 | else | ^ State.xs:2875:36: warning: '/*' within block comment [-Wcomment] 2875 | /*PL_op->op_type = OP_CUSTOM; /* we do behave like entersub still */ | ^ State.xs:4576:25: warning: passing arguments to a function without a prototype is deprecated in all versions of C and is not supported in C23 [-Wdeprecated-non-prototype] 4576 | RETVAL = nvtime (aTHX); | ^ 4 warnings generated. rm -f ../blib/arch/auto/Coro/State/State.so cc -shared -L/usr/local/lib/perl5/5.36/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong State.o -o ../blib/arch/auto/Coro/State/State.so chmod 755 ../blib/arch/auto/Coro/State/State.so Manifying 20 pod documents cp Event.pm ../blib/lib/Coro/Event.pm Running Mkbootstrap for Event () chmod 644 "Event.bs" "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 "/usr/local/bin/perl" "/usr/local/lib/perl5/5.36/ExtUtils/xsubpp" -typemap '/usr/local/lib/perl5/5.36/ExtUtils/typemap' Event.xs > Event.xsc mv Event.xsc Event.c cc -c -I/usr/local/lib/perl5/site_perl/mach/5.36/Event -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.36/mach/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c rm -f ../blib/arch/auto/Coro/Event/Event.so cc -shared -L/usr/local/lib/perl5/5.36/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong Event.o -o ../blib/arch/auto/Coro/Event/Event.so chmod 755 ../blib/arch/auto/Coro/Event/Event.so Manifying 1 pod document cp EV.pm ../blib/lib/Coro/EV.pm Running Mkbootstrap for EV () chmod 644 "EV.bs" "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 "/usr/local/bin/perl" "/usr/local/lib/perl5/5.36/ExtUtils/xsubpp" -typemap '/usr/local/lib/perl5/5.36/ExtUtils/typemap' EV.xs > EV.xsc mv EV.xsc EV.c cc -c -I/usr/local/lib/perl5/site_perl/mach/5.36/EV -I/usr/local/lib/perl5/site_perl/mach/5.36 -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -DVERSION=\"6.57\" -DXS_VERSION=\"6.57\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.36/mach/CORE" -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c rm -f ../blib/arch/auto/Coro/EV/EV.so cc -shared -L/usr/local/lib/perl5/5.36/mach/CORE -lperl -L/usr/local/lib -fstack-protector-strong EV.o -o ../blib/arch/auto/Coro/EV/EV.so chmod 755 ../blib/arch/auto/Coro/EV/EV.so Manifying 1 pod document Manifying 20 pod documents =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> p5-Coro-6.570,1 depends on package: p5-AnyEvent>=7,1 - found ===> p5-Coro-6.570,1 depends on package: p5-AnyEvent-AIO>=1.0 - found ===> p5-Coro-6.570,1 depends on package: p5-EV>=4 - found ===> p5-Coro-6.570,1 depends on package: p5-Event>=1.08 - found ===> p5-Coro-6.570,1 depends on package: p5-Guard>=0.5 - found ===> p5-Coro-6.570,1 depends on package: p5-IO-AIO>=3.1 - found ===> p5-Coro-6.570,1 depends on package: p5-common-sense>=0 - found ===> p5-Coro-6.570,1 depends on package: perl5>=5.36<5.37 - found =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Staging for p5-Coro-6.570,1 ===> Generating temporary packing list "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- State.bs ../blib/arch/auto/Coro/State/State.bs 644 Manifying 20 pod documents "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs ../blib/arch/auto/Coro/Event/Event.bs 644 Manifying 1 pod document "/usr/local/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs ../blib/arch/auto/Coro/EV/EV.bs 644 Manifying 1 pod document Manifying 20 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/auto/Coro/EV/EV.so Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/auto/Coro/State/State.so Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/auto/Coro/Event/Event.so Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/RWLock.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/BDB.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/State.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Event.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/MakeMaker.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Timer.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Util.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/EV.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Specific.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/AIO.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/LWP.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Signal.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/CoroAPI.h Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Intro.pod Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Channel.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/AnyEvent.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Storable.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Select.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Socket.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Semaphore.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/jit-amd64-unix.pl Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Debug.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/Handle.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/SemaphoreSet.pm Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/Coro/jit-x86-unix.pl Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Handle.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Socket.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::AnyEvent.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Event.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Specific.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::LWP.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::State.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::SemaphoreSet.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Signal.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Util.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::RWLock.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::BDB.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Select.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Channel.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Debug.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Storable.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::EV.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Intro.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Semaphore.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::MakeMaker.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::AIO.3 Installing /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/man/man3/Coro::Timer.3 /usr/bin/strip /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/auto/Coro/EV/EV.so /usr/bin/strip /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/auto/Coro/Event/Event.so /usr/bin/strip /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/lib/perl5/site_perl/mach/5.36/auto/Coro/State/State.so install -m 0644 /wrkdirs/usr/ports/devel/p5-Coro/work/Coro-6.57/doc/cede-vs-schedule /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/share/doc/Coro/ install -m 555 /wrkdirs/usr/ports/devel/p5-Coro/work/Coro-6.57/eg/* /wrkdirs/usr/ports/devel/p5-Coro/work/stage/usr/local/share/examples/Coro/ ====> Compressing man pages (compress-man) =========================================================================== =================================================== ===== env: 'PKG_NOTES=build_timestamp ports_top_git_hash ports_top_checkout_unclean port_git_hash port_checkout_unclean built_by' 'PKG_NOTE_build_timestamp=2025-05-01T16:19:23+0000' 'PKG_NOTE_ports_top_git_hash=5529c5919b' 'PKG_NOTE_ports_top_checkout_unclean=yes' 'PKG_NOTE_port_git_hash=1a35b19e6d' 'PKG_NOTE_port_checkout_unclean=no' 'PKG_NOTE_built_by=poudriere-git-3.4.2' NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Building packages for p5-Coro-6.570,1 ===> Building p5-Coro-6.570,1 =========================================================================== =>> Cleaning up wrkdir ===> Cleaning for p5-Coro-6.570,1 build of devel/p5-Coro | p5-Coro-6.570,1 ended at Thu May 1 17:20:00 BST 2025 build time: 00:00:37